Backshell Configurator
1 Choose Your Connector Designator
Choose the connector designator for your backshell. Reference the chart below if needed.
| Connector Options | |||
|---|---|---|---|
| CONNECTOR DESIGNATOR | CONNECTOR SPECIFICATION | SERIES | CONNECTOR SHELL SIZES (dependent on connector part number) |
| A | MIL-C-5105 MIL-C-26482 MIL-C-81703 MIL-C-83723 DEF 5926-3 LN 29504 NFC 93422 PAN 6432-1 PAN 6432-2 PATT 602 | MS3400 Ⅱ Ⅲ Ⅰ & Ⅲ | 08, 10, 12, 14, 18, 20, 22, 24 |
| D | MIL-C-26482 | Ⅰ | 08, 10, 12, 14, 16, 18, 20 |
| F | MIL-C-38999 4CM38277 NFC 93422 | Ⅰ & Ⅱ | 08, 10, 12, 14, 16, 18, 20, 22, 24 |
| G | MIL-C-28840 | 09, 11, 13, 15, 17, 19, 23 | |
| H | MIL-C-38999 | Ⅲ & Ⅳ | 09, 11, 13, 15, 17, 19, 21, 23, 25 |
If you do not see the connector designator you need, contact us at (316) 682-5634.
2 Choose Your Angular Type
Choose the angle of your backshell (Straight, 90°, or 45°).
3 Isodyne Series Backshell
Choose the Isodyne backshell series you need. Reference the chart below if needed.
| Backshell Series | Standard Mil Connectors | Quick-tie Strain Relief | Double Banding | Spring Band | Boot Groove | Straight | 45° | 90° | Split Access | Termination Slots | D-Sub |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RJ45 | x | x | x | x | |||||||
| 101 | x | x | x | x | x | ||||||
| 135 | x | x | x | x | x | x | x | x | |||
| 150 | x | x | x | x | x | x | x | ||||
| 155 | x | x | x | x | x | x | x | x | |||
| 160 | x | x | x | x | x | x | x | x | |||
| 165 | x | x | x | x | x | x | x | x | x | ||
| 170 | x | x | x | x | x | x | |||||
| 180 | x | x | x | x | x | x | x | x | |||
| 191 | x | x | x | x | x | x | |||||
| 200 | x | x | x | x | x | x | x | x | x | ||
| 205 | x | x | x | x | x | x | x | x | x | ||
| 207 | x | x | x | x | x | x | x | x | |||
| 215 | x | x | x | x | x | x | x | ||||
| 605 | ARINC | x | x | x | x | x | x | x |
We do not have all our series' on the website. If you do not see the series of backshell you need, contact us at (316) 682-5634.
4 Choose Your Finish
Choose the finish of the backshell that you need. Reference the chart below for finish codes.
| Backshell Finishes | |
|---|---|
| B | Cadmium / Olive Drab |
| J | Gold Iridite over Cadmium Plate over Nickel |
| LF | Cadmium Plate / Bright Over Electroless Nickel |
| M | Electroless Nickel |
| N | Cadmium Plate / Olive Drab over Nickel |
| P2 | Nickel Plate IAW SAE-AMS-QQ-N-290, Class I Grade D over Double Zincate Coating IAW ASTM-B-253 |
| NF | CAD / OD Over Electroless Nickel (500 HR. Salt Spray) |
| NT | Nickel / Teflon - Consult Factory for Details |
| T | Cadmium Plate / Bright DMP over Nickel |
| U | Cadmium Plate / Black |
| Z1 | Passivate SS |
| ZN | Zinc Nickel / OD over Electroless Nickel |
| ZNU | Zinc Nickel with Black Chromate |
5 Backshell Shell Size
Choose the shell size for the backshell that you need.
6 Cable Entry Size
Choose the cable entry size for the backshell that you need. Reference the chart below for size codes.
| Cable Entry Designator | Cable Entry Size in Inches |
|---|---|
| 01 | .125 |
| 31 | .188 |
| 02 | .250 |
| 32 | .312 |
| 03 | .375 |
| 33 | .438 |
| 04 | .500 |
| 34 | .562 |
| 05 | .625 |
| 35 | .688 |
| 06 | .750 |
| 36 | .812 |
| 07 | .875 |
| 37 | .938 |
| 08 | 1.000 |
| 38 | 1.062 |
| 09 | 1.125 |
| 10 | 1.250 |
| 11 | 1.375 |
| 12 | 1.500 |
| 13 | 1.625 |
| 14 | 1.750 |
| 15 | 1.875 |
| 16 | 2.000 |
If you do not see the cable entry size you need, contact us at (316) 682-5634.
7 Number of Slots
Choose the number of slots for the backshell that you need.
If you do not see the number of slots you need, contact us at (316) 682-5634.
