Isodyne’s EMI/RFI Micro-D backshells are built to MIL-DTL-24308 (previously MIL-C-24308) specification design standards. MIL-DTL-24308 backshells are polarised shell rectangular connectors that have solder or non-removable crimp contacts.
EMI/RFI MICRO-D MIL-DTL-24308 MIL SPEC RECTANGULAR BACKSHELLS
Showing all 4 results
-
200 Series D-Sub Backshell
200 Series D-Sub BackshellISO 200 SERIES ( REV. R ) EMI/RFI MIL spec D-sub connector backshells are a D-Subminiature available in top, end and side entry, three piece construction, split access design. Higher EMI/RFI Rating. Interfaces with MIL-C-24038 connector series.
$0.00 Details -
205 Series D-Sub Backshell
205 Series D-Sub BackshellISO 205 SERIES (REV. AB) EMI/RFI D-sub (D-Subminiature) connector backshells interface with MIL-C-24308, M24308 series connectors standard pin layouts. Available in straight, 45 and 90 degree cable entry.
$0.00 Details -
206 Series D-Sub Backshell
206 Series D-Sub BackshellISO 206 Series ( REV. D ) EMI/RFI MIL spec D-sub connector backshells are a two piece construction D-subminiature for ease of access for layout and rework which also allows this adapter to be assembled after testing. Interfaces with MIL-C-24038 connector series.
$0.00 Details -
207 Series D-Sub Backshell
207 Series D-Sub BackshellISO 207 SERIES ( REV. Q ) EMI/RFI MIL spec D-sub connector backshells are an elliptical D-subminiature for higher density cables. Available in straight and 90 degree configurations. Compliments MIL-C-24308 connectors and standard pin layouts.
$0.00 Details