Browse Isodyne’s MIL-spec EMI/RFI backshells that interface with Connector Designator F and built to 40M38277 specification design standards.
CONNECTOR DESIGNATOR F 40M38277 MIL SPEC CIRCULAR BACKSHELLS
Showing all 11 results
-
ISO 101 Series Backshell
101 Series Circular BackshellISO 101 ( REV. D ) Series EMI/RFI MIL-spec circular connector backshells are light weight, economical, and saves space by eliminating the rotating coupling nut. The slot and boot groove are optional providing faster lead times and lower cost. Some connector interfaces include, but are not limited to: MIL-C-5015, MIL-C-26482, D38999 Series I, II, III, IV.
$0.00 Details -
ISO 150 Series Backshell
150 Series Circular BackshellThe Isodyne ISO 150 Series (REV. AF) EMI/RFI circular connector backshells offer a single banding surface. Interfaces with MIL-C-26482, D38999 Series I,II,III,IV and more. Available in straight, 45 and 90 degree angular functions with superior EMI/RFI protection for military and commercial application.
$0.00 Details -
ISO 151 Series Backshell
151 Series Circular BackshellISO 151 SERIES ( REV. H ) EMI/RFI circular connector backshells are a direct couple backshell for Connector Designator B MIL-C-5015, MS3100 series connectors as well as Connector Designator D MIL-C-26482 Series I backshells.
$0.00 Details -
ISO 155 Series Backshell
155 Series Circular BackshellISO 155 SERIES ( REV. K ) EMI/RFI circular connector backshells offer a single banding surface and a Quick-Tie strain relief. They are available in straight, 45 and 90 degree angular functions. Interfaces with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00 Details -
ISO 160 Series Backshell
160 Series Circular BackshellISO 160 SERIES ( REV. K ) EMI/RFI circular connector backshells offer two banding surfaces for double gross over braid requirements. It is available in straight, 45 and 90 degree angular functions and in reverse bayonet. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00 Details -
ISO 165 Series Backshell
165 Series Circular BackshellISO 165 SERIES ( REV. K ) EMI/RFI circular connector backshells are similar to our 160 series while adding Quick-Tie strain relief. These are available in straight, 45 and 90 degree angular functions and in reverse bayonet coupling. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00 Details -
ISO 170 Series Backshell
170 Series Circular BackshellISO 170 SERIES ( REV. E ) EMI/RFI connector backshell is a low profile, two piece design with a single banding platform. The two piece design allows for easier repair service in the field while the low profile offers additionally space savings over our standard back shells. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00 Details -
ISO 180 Series Backshell
180 Series Circular BackshellISO 180 SERIES ( REV. K ) EMI/RFI circular connector backshells are a low profile hinged solution that allows easy access to the pins for field repair service with direct access to pins and contacts. Particularly beneficial when using high pin count connectors to allow ease of routing wires in the back shell. They are compatible with MIL-C-26482, D38999 Series I,II,III,IV and more. Available in Straight, 45, & 90 degree E.W.I.S. Solutions.
$0.00 Details -
ISO 191 Series Backshell
191 Series Circular BackshellISO 191 SERIES ( REV. J ) EMI/RFI circular connector backshells are our hinged low profile backshell with an elliptical cable entry, allowing for easy repair/service in the field with direct access to pin contacts and wires. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more. Available in 90 degree cable entry only. E.W.I.S. Solutions.
$0.00 Details -
Shorting Cap Backshell
40M3827Protect your backshell connectors from debris when not in use with Isodyne Shorting Cap Backshells. Variable body and lanyard lengths to best fit your application.
$0.00 Details -
Super Short Backshell
40M3827Isodyne Super Short circular backshell adapter is one of the smallest EMI backshells available. Direct coupling to the connector reduces stack up allowing for smaller, lighter over molds. A lower cost backshell option with excellent reliability and EMI performance. Available in all plating options.
$0.00 Details