Browse Isodyne’s MIL-spec EMI/RFI backshells that interface with Connector Designator D and built to MIL-C-26482, Series I specification design standards.
Built to meet or exceed MIL-DTL-26482 specifications and is guaranteed fully compatible and interchangeable with respect to physical and performance characteristics with all existing MIL-DTL-26482 Series I military and commercial derivatives
Showing all 7 results
The Isodyne ISO 150 Series (REV. AF) EMI/RFI circular connector backshells offer a single banding surface. Interfaces with MIL-C-26482, D38999 Series I,II,III,IV and more. Available in straight, 45 and 90 degree angular functions with superior EMI/RFI protection for military and commercial application.
$0.00
ISO 151 SERIES ( REV. H ) EMI/RFI circular connector backshells are a direct couple backshell for Connector Designator B MIL-C-5015, MS3100 series connectors as well as Connector Designator D MIL-C-26482 Series I backshells.
$0.00
ISO 155 SERIES ( REV. K ) EMI/RFI circular connector backshells offer a single banding surface and a Quick-Tie strain relief. They are available in straight, 45 and 90 degree angular functions. Interfaces with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00
ISO 160 SERIES ( REV. K ) EMI/RFI circular connector backshells offer two banding surfaces for double gross over braid requirements. It is available in straight, 45 and 90 degree angular functions and in reverse bayonet. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00
ISO 165 SERIES ( REV. K ) EMI/RFI circular connector backshells are similar to our 160 series while adding Quick-Tie strain relief. These are available in straight, 45 and 90 degree angular functions and in reverse bayonet coupling. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00
ISO 170 SERIES ( REV. E ) EMI/RFI connector backshell is a low profile, two piece design with a single banding platform. The two piece design allows for easier repair service in the field while the low profile offers additionally space savings over our standard back shells. They interface with MIL-C-26482, D38999 Series I,II,III,IV and more.
$0.00
Protect your backshell connectors from debris when not in use with Isodyne Shorting Cap Backshells. Variable body and lanyard lengths to best fit your application.
$0.00